THIS IS NOT A FULL GHOST TRAP/PEDAL - THIS IS ONLY ASSEMBLY HARDWARE SHOWN IN FIRST PICTURE - YOU MUST 3D PRINT THE REST OF THE PARTS!
THIS IS THE HARDWARE NEEDED FOR A FULLY 3D PRINTED TRAP. IF YOU WANT TO ADD AS MUCH REAL HARDWARE AND MOVIE-ACCURATE PARTS, ALSO GET THE DELUXE HARDWARE KIT - https://www.etsy.com/listing/271511866
I designed a Ghost Trap that can be 3D printed - you must print all your own parts such as body panels, knobs, doors, etc - I am selling the nuts, bolts, screws, etc to put it all together. You receive only the parts shown in picture #1 above. If you have access to a 3D printer - download and print the parts for my Ghost Trap Pedal design: http://www.thingiverse.com/thing:1394639
See fully illustrated assembly guide here: www.charlesworth-dynamics.com/2013/08/instructions.html It's a good idea to take a look before you buy so you know what you're getting into.
This is also valuable for those already scratch building their own pedals as these are movie-accurate parts. This kit is includes only the following:
- Over 30 screws for assembly
- Rubber feet for base
- Hinge for pedal - this exactly lines up with the 3D printed model
- Ribbon cable and cable ties
- Red and yellow pneumatic tubing
- Spring hose used for pedal bellows
- Electronic Relay - the relay is the clear rectangular box with electronics in it mounted to the left side. The movie original relay is an ITT relay which I have not been able to find at a reasonable price. I am offering substitutes that are very close. The 11 pin socket will need printed from the 3D files I released.
- Extras of most parts are included for those who (like myself) WILL drop and lose something
- If you plan on 3D printing the female hose connectors you may also want the hose kit WITH magnets - https://www.etsy.com/listing/271389083
- A Deluxe Hardware Upgrade kit can be combined with this kit to add even more real hardware, such as side boxes, computer connectors, relay socket, etc: http://etsy.me/223d7Qb
- If using the Deluxe Kit you may also want a hose kit with movie-accurate connectors - http://etsy.me/24R8zP8
This is ONLY the hardware shown in the first picture, 3D printed Pedal and 3D printed parts are not included and must be printed elsewhere.
Pictures are of a fully 3D printed Pedal assembled with hardware kit.
Learn more about how the Trap and Pedal were built on Tested.com:
http://bit.ly/1LRt73B