This is a PREMADE library for materials for the OMTech (Orion Motors) 40w co2 laser.
This allows you to take the guess work out of finding the right settings for your OMTech! No more wondering what speeds and power, dpi, etc. to start with!
Follow me on YouTube: https://www.youtube.com/myerswoodshop for laser video how tos and projects!
This is an instant digital download! You must 'load' the file iin the 'library' tab of Lightburn.
Has the following materials:
Acrylic
Birch Plywood
Cardboard
Door Matt
EVA Foam
Glass
Leather
Paper
Paperboard
Powder Coat
Rubber
Stone & Tile
Textiles
LightBurn's Material Library provides a way to store and organize lots of presets for different operations on different materials, and have a way to quickly apply them. This is entirely user-generated - You set up a cut layer however you like and save it to a Library. You set a material type, thickness (if appropriate), and a short description.
HOW TO INSTALL:
This is a .zipped (compressed) file. You will need to unzip (decompress) it before importing into Lightburn.
then open Lightburn
then go to the 'library' tab in the bottom right near the 'laser' tab.
then click 'load'
Select my unzipped .clb library file.
Done.
WILL NOT INSTALL IN TRIAL VERSIONS!
Here's a link to what it is and how to use the library.
https://lightburnsoftware.github.io/NewDocs/MaterialLibrary.html
*please note, this was made with a Omtech with a 40w tube* These settings are made to get you close to final, but you should do your own work finding the correct settings for your machine.